| CARDIOID
CONDENSER QUICK-MOUNTGOOSENECK MICROPHONE -
Designde for high-quality sound reinforcement, professional recording and
broadcasting. -
Superior off-axis fejection for maximum gain before feedback. -
Easy-to-adjust. rugged, small-dimeter, alternating gooseneck with vitually
no "memory" per
mits quick prsitioning into desired shape. -
Flter provides a steep low-frequency attenuation to improve sound pickup
without affecting v
oice quality. -
Self-contained electronics eliminate need for external power module. -
Two-stage foam windscreen yields dramatically improved resistance to
P-pops and other br
eath blasts. -
Quick mount design with 2-pin XLRM-type connector insert at base plugs
into any standard XLRF-
type surface or acble connector. -
Optional shock mount attenuates moise, shock and vibration transitted
through the mounting surface. The
ROSE 8000 stands 480mm from the table or podium, and require 11V to 52V
phantom power for
operation. Output
from the microphone`s XLRM-type connector is low impedance (Lo-Z)
balanced. The
signal appears scross Pins 2 amd 3 Pin 1 is ground (shield). Output
phaseis "Pin 2 hot"- positive
acoustic pressure produces positive voltage at Pin 2. At
integral 80 Hz high-pass filter provides easy switching from a flat
fequency respones to a low-end
roll-off. The roll-off position reduces the microphone`s sensitivity to
popping in close
vocal use. It also reduces the pickup of low-frequency ambient noise (such
as traffic, air-handling
systems, etc.) room reveberation and mechanically coupled vibrations. Avoid
leaving the microphone in the open sun or in areas where trmperatures
exceed 43°
C for exnded
periods. Extremely high humidity should also be avoided. SPECIFICATIONS
| ELEMENT | Fixed-charge
back plate permanently polarized condenser |
| POLAR
PATTERN | Cadioid |
| FREQUENCY
RESPONSE | 100-16.000Hz |
| LOW
FREQUENCY ROLL-OFF | 80Hz,
18dB/octave |
| OPEN
CIRCUIT SENSITIVITY | -43dB(7.0mV)
re 1V at 1Pa |
| IMPEDANCE | 250ohms |
| MAXIMUM
INPUT SOUND LEVEL | 140dB
SPL, 1kHz at 1% T.H.D |
| DYNAMIC
RANGE(TYPICAL) | 111dB,
1kHz at Max SPL |
| SIGNAL-TO-NOISE
RATIO | 65dB,
1kHz at 1Pa |
| PHANTOM
POWER REQUIRMENTS | 11-52V
DC, 2mA typical |
| SWITCH | Flat,
roll-off |
| WEIGHT | 152g |
| DIMENSIONS | 480mm-long,
12.3mm-head diameter, 18.9mm-base diameter |
| OUTPUT
CONNECTOR | Integral
3-pin XLRM-type |
| ACCESSORIES
FURNISHED | ROSE
8000 two-stage foam windscreen |
| 
SOLD OUT
