Description:
The Tascam CD-RW900MKII professional CD recorder features a TEAC tray-loading
transport ensures years of reliable operation in the most demanding
installations. The new transport also allows gapless recording when writing
track markers, something not possible using off-the-shelf PC drives. Various
recording features like automatic track creation help the operator create
polished recordings without constant supervision. An AKM AK4528VM is used for
AD/DA conversion for clean, clear sound quality with a frequency response of
20Hz to 20kHz +/-0.8dB.
Tascam CD-RW900MKII Features:
- Adopts AK4528VM audio codec made by Asahi Kasei Micro devices which has
24-bits processing
- Independent input level controls provides serious level control
- Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA
- High speed CD-RW Supports
- CD drive supports playback of CD-DA and Data-CD
- High reliability proprietary TEAC tray drive
- OPC (optimum power control) function: Adjusting the laser power for each
disc type
- Fade-in/Fade-out recording function (1 to 30 seconds, 1 seconds increments)
- Sync recording function: Automatically start/stop recording at a preset
level (-24dB to -72dB, 6dB increments)
- Digital volume for adjusting recording level seriously (-8?-54.0dB to
18.0dB)
- Automatic track division: Automatically insert a track division at a preset
condition
- Manual track division: Insert a track division by manual operation
- Time track division: Automatically insert a track division per preset
interval (1 to 10 minutes, 1 minutes increments)
- Rec-mute function: Recording four seconds of silence on the disc
- Selectable maximum recording track numbers (automatically stop at preset
number)
- Erase function: Erase selected track or disc (for CD-RW)
- Four playback modes (continuous, single, program, random)
- Repeat playback function (continuous, single, program, random, A-B)
- Fade-in/Fade-out playback function (OFF, 1 to 30 seconds, 1 seconds
increments)
- Auto-cue function: Automatically pause by detection of a sound of start
point in a track
- Auto-ready function: Automatically pause at head of next track after
playback previous track
- Pitch control playback function: Pitch and speed can be varied (+/-16%, 0.1
to 1.0% increments, for CD-DA)
- Key control playback function: (b1 to b6, #1 to #6 ,half-note increments,
for CD-DA)
- When using key control function with pitch control function, these function
provides speed changing without changing pitch
- Timer playback function (external timer sold separately):
Automatically begin playback when turned on
- Unfinalize function (for CD-RW): Erase TOC information of finalized CD-RW
- Time display switching (elapsed track/disc time, remaining track/disc time)
- CD-text editing supports
- PS/2 keyboard (sold separately) connection for remote control or entering a
title
- SRC (sampling rate converter): Automatically convert the incoming frequency
to 44.1kHz (for 32 to 48kHz)
- RCA analog unbalanced inputs/outputs
- COAXIAL digital input/output (IEC60958-3:S/P DIF)
- OPTICAL digital input/output (IEC60958-3:S/P DIF)
- Wireless remote controller with 10-key included
- Headphone output (20mW/ch)
- 3-polar AC sockets with the detachable AC cable
- 2U EIA rackmountable
- RoHS certified
- Dedicated Features for CD-RW901MKII:
- Sync trim function (+/-125 frame, +/-1.67 seconds)
- Automatic track division with trim function (+/-125 frame, +/-1.67 seconds)
- Selectable COPY ID(free/1 generation/prohibit/SCMS)
- Call function: Return to a point at which playback last started from ready
mode
- EOM (end of message) function: EOM indicator will light-up before the end of
track or disc (1 to 99 seconds)
- ISRC/RID code display function
- Time skip function: While in playback or ready, moves the playback point to
forwards or backwards (1 seconds increments)
- Index search function: Search indexes within a track that were assigned
during recording
- Fader start/stop control via parallel control connector
- D-sub 9pin RS-232C serial control connector
- D-sub 15pin parallel control connector
- XLR analog balanced inputs/outputs
- XLR digital input/output (IEC60958-4:AES/EBU)
- Wired remote controller included
- Differences from CD-RW900SL/CD-RW901SL:
- Time track division added to CD-RW900MKII
- Industrial design
- Tray loading type CD drive
Tascam CD-RW900MKII Specifications:
- Supported disc types: CD-R, CD-R-DA, CD-RW,CD-RW-DA (High Speed CD-RW
is supported)
- Playback disc formats: CD-DA, CD-ROM ISO9660LEVEL 1/2 Joilet format,
multi-session discs and CD-text
- Playback file formats:
- CD-DA: 44.1kHz, 16bit, stereo
- MP3: 44.1kHz, 64 to 320kbps, VBR
- Recording file formats: CD-DA 44.1kHz, 16-bit, stereo
- ANALOG IN:
- Unbalanced:
- Connector: RCA pin jack
- Input impedance: 22kOhm +/-10% (unbalanced)
- Reference input level: -10dBV (Full scale -16dB)
- Minimum input level: -19dBV (adjustable level at Full Scale
-16dB)
- ANALOG OUT:
- Unbalanced:
- Connector: RCA pin jack
- Output impedance: 200 Ohms
- Reference output level: -10dBV +/-2dB (Full scale -16dB)
- Maximum output level: +6dBV +/-2dB
- DIGITAL IN:
- COAXIAL:
- Connector: RCA pin jack
- Format: IEC60958-3(S/P DIF)
- OPTICAL:
- Connector: TOS LINK
- Format: IEC60958-3(S/P DIF)
- DIGITAL OUT:
- COAXIAL:
- Connector: RCA pin jack
- Format: IEC60958-3(S/P DIF)
- OPTICAL:
- Connector: TOS LINK
- Format: IEC60958-3(S/P DIF)
- PHONES:
-
- Connector: 6.3mm(1/4") stereo phone jack
- Output power: 20mW + 20mW or more (32 Ohms loaded)
- KEYBOARD:
- Connector: Mini DIN 6-pin
- Power: 120VAC, 60Hz
- Power consumption: 16W
- Dimensions: 19" W x 3.7" H x 12.2" D (482.6 x 94 x309 mm)
- Weight: 9.5 lbs (4.3 kg)
Audio performance
- Frequency response:
- playback: 20Hz to 20kHz, +/-0.8dB
- recording: 20Hz to 20kHz, +/-1.0dB
- S/N ratio:
- playback: 95dB
- recording: 90dB
- Dynamic range:
- playback: 95dB
- recording: 90dB
- Distortion:
- playback: 0.006%
- recording: 0.008%
- Channel separation:
- playback: 90dB(1kHz)
- recording: 80dB(1kHz)
- Wow and flutter: Immeasurable (0.001% or less)
|