Frequency Response |
20 Hz ~ 20 kHz +/- 0.5dB @ +4dB 600 omega (0 dB is referenced to 0.775V RMS.) |
Total Harmonic Distortion |
Less than 0.05% (THD+N), 20 Hz ~ 20kHz @ +4dB 600 omega, Equalizer...all flat (0dB) |
Hum and Noise |
-94dB; Equalizer...all flat (0dB), Input Level...Max. (Average, Rs=600 Omega BPF:20Hz ~ 20kHz) |
Maximum Voltage Gain |
0dB, Input Level...Max. |
Center Frequencies |
31 band (1/3 octave) 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20kHz |
Variable Range |
+/-12dB thru +/-6dB |
High Pass Filter (Rolloff Frequency) |
12dB/octave (80Hz at -3dB point.) |
Peak LED Indicator |
Red LED on each channel turns on when post-EQ signal reaches the level 3 dB below clipping. |
Signal LED Indicator |
Green LED on each channel turns on when post-EQ signal reaches the level 13 dB below nominal level. |
Power Requirements |
AC120V, 60Hz |
Power Consumption |
13W |
Dimensions |
480mm (W) x 49.4mm (H) x 230mm (D) (18 7/8" x 1 15/16" x 9 1/16") |
Weight |
2.8 kg (6.1 lbs.) |
INPUT Specifications |
Connectors: INPUT (A,B); Impedance: 15kOmega; Source Impedance: 600 Omega Lines; Input Level Sensitivity(Input level required to obtain the nominal output level): +4dB(1.23V); Nominal Level: +4dB (1.23V); Maximum Before Clipping: +24 dB(12.3V); Connectors: XLR-3-31 Type Phone Jacks(TRS) - both balanced. [1=Ground, 2=+,3=-; T=+,R=-, S=Ground] |
Output Specifications |
Connectors: OUTPUT (A,B); Impedance: 150 Omega; Load Impedance: 600 Omega Lines; Output Level - Nominal Level: +4dB (1.23V); Output Level - Maximum Before Clipping: +24 dB (12.3V); Connectors: XLR-3-32 Type Phone Jack (TRS) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?