With a frequency response from 40Hz to 20kHz, and a maximum output in excess of 120dB SPL at 1.25m, the M1.5 is truly exceptional.
Where it is quite normal to employ audio processing techniques to extract the last drop of performance from a drive unit in an active system, the totally passive M1.5 relies purely on component quality. The secrets behind its performance lie in the new high sensitivity drivers developed exclusively for this model, coupled with a very efficient twin ported cabinet and an impedance corrected crossover which ensures that the optimum load is presented to the amplifier at all times. Imaging is pin sharp, even in difficult environments, thanks to the directionally controlled tweeters.
A trim switch on the rear of the cabinet allows for fine tuning of the mid/high frequency response, further enhancing its use in near and midfield environments with
varying acoustical characteristics
*상세설명
The M1.5 is a fairly "punchy" monitor with an incredible bass response mainly suited to popular music tracking and mixing, voice and dialog recording, and as L, C, R monitors in high performance surround monitoring systems.
Mounted either in the nearfield on top of a console or in midfield just behind
the console on suitable stands, it can easily fulfill the majority of monitoring needs. Flush mounting is also an option when careful attention is paid to room design, construction and acoustic treatment.
Model | M 1.5 |
System | 2-way Passive Near/Midfield Monitor |
Frequency Response (+/- 3 dB) |
34 Hz - 20 kHz |
Peak SPL 1m, pair (IEC Short Term) |
> 127 dB peak |
Peak SPL 2m, 5.1 (IEC Short Term) |
> 128.5 dB peak |
Amplifier minimum | 70 W (> 100 dB SPL @ 1,5m) |
Sensitivity (2.83 V/1m) | 88 dB |
Impedance, Nominal | 4 ohm |
Impedance, HF (200 kHz) | 6,2 ohm |
Resonance Frequency | 39 Hz |
Internal Cabinet Volume | 29 liters |
Bass Principle | Bass reflex |
Crossover Frequencies | 2000 Hz |
Crossover Slope | Woofer 18 dB/oct; Tweeter 12 dB/oct |
Tweeter | Esotec 28 mm/1.1” soft dome Magnetic fluid, Rear chamber Pure alu wire voice coil, 4 mm die-cast alu front |
Woofer | 175mm/6.9”, One-piece molded polypropylene cone, 75 mm pure alu wire voice coil |
Weight | 17,7 kg/ 39 lbs |
Dimensions (WxHxL) | 440 x 300 x 400 mm |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?